|
|
|
|
JOURNAL OF POLYMER ENGINEERING Vol. 23, No. 2, 2003, page 119 ENCAPSULATION DURING MELT PROCESSING OF TERNARY IMMISCIBLE POLYMER BLENDS *Department
of Materials Engineering and ABSTRACT
Filled immiscible polymer blends may exhibit several typical
morphologies: filler particles and minor polymer particles separately dispersed
in the matrix, filler particles located at interfaces between the continuous
matrix and the dispersed polymer particles, and filler particles encapsulated by
the minor polymer phase.
The actual morphology developed during a melt blending process is
determined by thermodynamic parameters, e.g., polymer/filler interfacial
tensions, or spreading coefficients, and by kinetic factors, e.g., polymer
viscosity.
The main objective of this study was to investigate the dominant
parameters that have led to a preferred morphology and to relate the mechanical
and thermal behavior of some multicomponent blends to their morphology.
A series of ternary blends with varying compositions was chosen,
comprising polar EVOH as the minor phase, a semi-crystalline matrix of varying
polarity (PP and EVA) and mica as the filler. The morphology of the blends studied has revealed the existence of two dispersed phases: EVOH encapsulating mica particles and some separately dispersed EVOH particles in the polymer matrix. The size and amount of the separately dispersed EVOH particles and the shape of the encapsulated particles varied according to differences in interfacial tension between the polymer matrix and the EVOH. The structure of the multicomponent blends studied has a significant effect on their behavior as depicted by their thermal, rheological, static and dynamic mechanical properties. The structure itself can be controlled by careful selection of the blend’s components, its composition and processing details.
|
|
Freund Publishing House Ltd, P.O. Box 35010, Tel Aviv, Israel, 61350. Tel: 972-3- 562-8540; Fax: 972-3-562-8538 E-mail: h_freund@netvision.net.il; website: https://www.freundpublishing.com
|
