|
JOURNAL OF POLYMER
ENGINEERING
Vol. 24, Nos.
1-3, 2004
Special Issue:
Papers
Presented at the IKV 21st Plastics Technology Colloquium, Aachen,
Germany, February 27 - March 1, 2002
TABLE OF CONTENTS & ABSTRACTS
(to view abstracts, click on paper title)
Mechanical
Design of Plastics Injection Moulds by Means of FEA
W. Michaeli and M. Thornagel ......
1
Realistic
Stress Analysis Beyond the Initiation of Matrix Cracks
E. Schmachtenberg and M. Knops .....
15
Investigations on the Fibre Fracture Behaviour of CFRP Laminates Under
Biaxial Loading
E. Schmachtenberg,
O. Fischer, and D. Eifel ................ 33
Thixomoulding
Injection Moulding of Semi-Solid Magnesium Alloys
W. Michaeli and G. Rettemeier ... 49
Injection
Transfer Moulding – An Innovative Basis for the Processing
of
Thermoplastic Materials
W. Michaeli and M. Koch ...
65
New
Plastification Concepts for Micro Injection Moulding
W. Michaeli, A. Spennemann, and R. Gärtner
...... 81
Determination of the Deformation and the Failure
Mechanisms of
Thermoplastics Under Unidirectional Compressive
Stress
W. Michaeli and T. Krumpholz ...
95
The
Influence of Strain on the Properties of Plasma Polymerized
Permeation
Barriers
W. Michaeli, S. Göbel, and R.
Dahlmann ..... 107
Approach
of an Automatic Extrusion Die Optimization
W. Michaeli and S. Kaul ...
123
Flat
Spiral Dies – Rheological Design with Network Theory
W. Michaeli and P. Blömer ... 137
Radial
Wall-Thickness Profiling for Small Parison Diameters
in
Extrusion Blow Molding
W.
Michaeli and J. Grünewald
.... 155
Friction
in the Feed-Section of Single-Screw-Extruders Dependent on
Pellet
Shape, Fillers and Additives
W. Michaeli and A. Imhoff ... 169
E.
Haberstroh and S. Prollius ... 191
Multi-Component Injection Moulding of Liquid Silicone
Rubber/Thermoplastic Combinations
E. Haberstroh and C. Lettowsky ... 203
Development
of an Alternative Process Technology for Foam Injection Moulding with Physical
Blowing Agents
W. Michaeli and S. Habibi-Naini
... 215
Production
of Optical Parts with Adapted Process and Mould Technology
W. Michaeli and J. Forster ... 229
Resin Transfer Moulding for Railway Industry –
Development and Processing
of
a Composite Front End Bumper
E. Schmachtenberg and J. Töpker ... 243
New Tool Concepts for the Production of Complex
Structures with the Resin Infusion Process
E. Schmachtenberg and S. Heilmann ... 259
Plasma Assisted External Coating of Plastics
Hollow Bodies
W. Michaeli and R. Dahlmann . ... 271
Improvements of the Simulation of Shrinkage and
Warpage with New Methods for the Material Characterisation
W. Michaeli and C. Starke ... 289
Prediction of the Morphology of Semi-Crystalline
Thermoplastics
W. Michaeli and S. Hoffmann .... 301
Three-Dimensional Modelling and Prediction of
Fiber Orientation in Injection Molding
W. Michaeli and M. Kratz ... 315
Batch Variations and their Effects on the
Elastomer-Processing Illustrated on the Model of the Injection Moulding Process
E. Haberstroh and C. Linhart .... 325
Progress in the Characterisation of the
Polyurethane-Specific Material Behaviour
E. Haberstroh, I. Kleba, and M. Schlumm ...... 343
Gas-Assisted Reaction Injection Moulding (G-RIM)
of Polyurethanes – New Developments
E. Haberstroh and I. Kleba .... 361
Modelling and Simulation of the Foam Formation
Process
E. Haberstroh and J. Zabold ... 377
_____________________
ISSN
0250-8079/24:1-3
390
pages
Price:
$150 including airmail delivery
| 
